Matrix Vision Pro
Allow simultaneous handling of multiple calls without any congestion or delays through Digital PBX
Digital PBX with 40+ Call Management Features
- 3-Participants Conference
- Abbreviated Dialing
- 100% Non-Blocking Routing
- Advanced Call Routing
- Call Recording and Voicemail
Power Fail Transfer
- Digital PBX prevents Data Loss in the Event of Power Loss
- Efficient Work in All-condition
- Failover Mechanisms for Power
- Uninterrupted Communication ensures Business Continuity
- Enhances Emergency response Capabilities
Digital PBX with Live Call Supervision
- Monitor Calls Made/Received by an Extension
- Call Quality Monitoring and Analysis
- Lessen Misconduct and Maintain Privacy
- Ensure Quality Customer Interactions
Highlight Features
01
02
03
04
05
06
07
08
09
VISIONPRO
VisionPro Variants.
Digital PBX for Small Modular Office
Digital PBX with 2 Trunks and 6 Analog Extensions
- 2 Trunks and 6 Analog Extensions
- 40+ Value Added Call Attributes
- PCM/TDM, Digital Switching, 100% Non-Blocking
- 16-bit DSP Processor
- DTMF and Pulse Dialing
- Over Voltage Secondary Protection
VISIONPRO206
Technical Specifications
| Parameters | Specifications |
|---|---|
| Type of Switching | PCM/TDM, Digital Switching, 100% Non-blocking |
| Processor | 16-bit DSP |
| Signaling | Loop Start |
| Dialing | DTMF and Pulse (10/20PPS) |
| Off-Hook AC Impedance | 600/900/Complex |
| Off-Hook Current | 39mA Max. |
| Loop Limit | 1800Ω Max (Excluding Telephone) |
| On-Hook Voltage (Tip/Ring) | -48V nominal |
| DTMF detection | ITU-T Q.24 |
| Return Loss | >18dB |
| Longitudinal Balance | >50dB |
| Transmission Level Adjust | Tx Gain: -12dB to +6dB, Rx Gain: -12dB to +6dB |
| Ringing | Trapezoidal 50VRMS/25Hz and Sinusoidal 52VRMS/25Hz |
| REN | 3 |
| CLI Presentation | DTMF, FSK ITU-T V.23 and FSK Bellcore 202 |
| Protection | Over Voltage Secondary Protection |
| Physical Connector | 2.54mm Push Type connector |
| CO (Central Office)/Two-Wire Trunk (TWT) | |
| Signaling | Loop Start |
| Loop Limit | 1200Ω |
| Off-Hook AC Impedance | 600/900/Complex |
| Pulse Dialling | 10/20 PPS |
| DTMF Dialling and Reception | ITU-T Q.23 and Q.24 |
| Return Loss | >18dB |
| Longitudinal Balance | >50dB |
| Transmission Level Adjust | Tx Gain: -15dB to +10dB. Rx Gain: -15dB to + 10dB |
| CLI Reception | DTMF, FSK ITU-T V.23 and FSK Bellcore 202 |
| Call Maturity | Delay and Polarity Reversal |
| Protection | Over Voltage and Over Current Secondary Protection |
| Physical Connector | Over Voltage Secondary Protection |
| Input | External Adapter 12V@2A for VISIONPRO 206, 308, 412 |
| Dimensions (WxHxD) | 23.1×16.25×5.5cm (10.5″x11.2″x3.1″) |
| Unit Weight | 0.65 kg (1.43lbs) |
| Shipping Weight | 3.5 kg (7.7lbs) |
| Installation | Wall Mount |
| Operating Temperature | 0°C to 45 °C (+32°F to +122°F) |
| Operating Humidity | 95% RH, Non-Condensing |
Digital PBX with 3 Trunks and 8 Analog Extensions
- 3 Trunks and 8 Analog Extensions
- 40+ Value Added Call Attributes
- PCM/TDM, Digital Switching, 100% Non-Blocking
- 16-Bit DSP Processor
- DTMF and Pulse Dialing
- Over Voltage Secondary Protection
VISIONPRO308
Technical Specifications
| Parameters | Specifications |
|---|---|
| Type of Switching | PCM/TDM, Digital Switching, 100% Non-blocking |
| Processor | 16-bit DSP |
| Signaling | Loop Start |
| Dialing | DTMF and Pulse (10/20PPS) |
| Off-Hook AC Impedance | 600/900/Complex |
| Off-Hook Current | 39mA Max. |
| Loop Limit | 1800Ω Max (Excluding Telephone) |
| On-Hook Voltage (Tip/Ring) | -48V nominal |
| DTMF detection | ITU-T Q.24 |
| Return Loss | >18dB |
| Longitudinal Balance | >50dB |
| Transmission Level Adjust | Tx Gain: -12dB to +6dB, Rx Gain: -12dB to +6dB |
| Ringing | Trapezoidal 50VRMS/25Hz and Sinusoidal 52VRMS/25Hz |
| REN | 3 |
| CLI Presentation | DTMF, FSK ITU-T V.23 and FSK Bellcore 202 |
| Protection | Over Voltage Secondary Protection |
| Physical Connector | 2.54mm Push Type connector |
| CO (Central Office)/Two-Wire Trunk (TWT) | |
| Signaling | Loop Start |
| Loop Limit | 1200Ω |
| Off-Hook AC Impedance | 600/900/Complex |
| Pulse Dialling | 10/20 PPS |
| DTMF Dialling and Reception | ITU-T Q.23 and Q.24 |
| Return Loss | >18dB |
| Longitudinal Balance | >50dB |
| Transmission Level Adjust | Tx Gain: -15dB to +10dB. Rx Gain: -15dB to + 10dB |
| CLI Reception | DTMF, FSK ITU-T V.23 and FSK Bellcore 202 |
| Call Maturity | Delay and Polarity Reversal |
| Protection | Over Voltage and Over Current Secondary Protection |
| Physical Connector | Over Voltage Secondary Protection |
| Input | External Adapter 12V@2A for VISIONPRO 206, 308, 412 |
| Dimensions (WxHxD) | 23.1×16.25×5.5cm (10.5″x11.2″x3.1″) |
| Unit Weight | 0.65 kg (1.43lbs) |
| Shipping Weight | 3.5 kg (7.7lbs) |
| Installation | Wall Mount |
| Operating Temperature | 0°C to 45 °C (+32°F to +122°F) |
| Operating Humidity | 95% RH, Non-Condensing |
Digital PBX with 4 Trunks and 12 Analog Extensions
- 4 Trunks and 12 Analog Extensions
- 40+ Value Added Call Attributes
- PCM/TDM, Digital Switching, 100% Non-Blocking
- 16-Bit DSP Processor
- DTMF and Pulse Dialing
- Over Voltage Secondary Protection
VISIONPRO412
Technical Specifications
| Parameters | Specifications |
|---|---|
| Type of Switching | PCM/TDM, Digital Switching, 100% Non-blocking |
| Processor | 16-bit DSP |
| Signaling | Loop Start |
| Dialing | DTMF and Pulse (10/20PPS) |
| Off-Hook AC Impedance | 600/900/Complex |
| Off-Hook Current | 39mA Max. |
| Loop Limit | 1800Ω Max (Excluding Telephone) |
| On-Hook Voltage (Tip/Ring) | -48V nominal |
| DTMF detection | ITU-T Q.24 |
| Return Loss | >18dB |
| Longitudinal Balance | >50dB |
| Transmission Level Adjust | Tx Gain: -12dB to +6dB, Rx Gain: -12dB to +6dB |
| Ringing | Trapezoidal 50VRMS/25Hz and Sinusoidal 52VRMS/25Hz |
| REN | 3 |
| CLI Presentation | DTMF, FSK ITU-T V.23 and FSK Bellcore 202 |
| Protection | Over Voltage Secondary Protection |
| Physical Connector | 2.54mm Push Type connector |
| CO (Central Office)/Two-Wire Trunk (TWT) | |
| Signaling | Loop Start |
| Loop Limit | 1200Ω |
| Off-Hook AC Impedance | 600/900/Complex |
| Pulse Dialling | 10/20 PPS |
| DTMF Dialling and Reception | ITU-T Q.23 and Q.24 |
| Return Loss | >18dB |
| Longitudinal Balance | >50dB |
| Transmission Level Adjust | Tx Gain: -15dB to +10dB. Rx Gain: -15dB to + 10dB |
| CLI Reception | DTMF, FSK ITU-T V.23 and FSK Bellcore 202 |
| Call Maturity | Delay and Polarity Reversal |
| Protection | Over Voltage and Over Current Secondary Protection |
| Physical Connector | Over Voltage Secondary Protection |
| Input | External Adapter 12V@2A for VISIONPRO 206, 308, 412 |
| Dimensions (WxHxD) | 23.1×16.25×5.5cm (10.5″x11.2″x3.1″) |
| Unit Weight | 0.65 kg (1.43lbs) |
| Shipping Weight | 3.5 kg (7.7lbs) |
| Installation | Wall Mount |
| Operating Temperature | 0°C to 45 °C (+32°F to +122°F) |
| Operating Humidity | 95% RH, Non-Condensing |
