SETU VFX

Matrix SETU VFX

SETU VFX provides an embedded web server with a Graphic User Interface (GUI), Jeeves, for configuration.

Peer-to-peer Calls
  • Direct Calls Between IP Phones and Analog Phones through VoIP FXO FXS Gateway
  • Elimination of the Need for Intermediate Gateways
  • Connect Remote Branch Offices over VoIP
  • Increase Workforce Collaboration
      • Automatic Switching to PSTN in Case of VoIP Network Failure through VoIP FXO FXS Gateway
      • Continuous Network Connectivity
      • Reduces Dependency on a Single Network
      • Redundant Communication Channels for Increased Reliability
      • Quick Recovery from VoIP Network Disruptions
      • Secure Remote Management Protocol through VoIP FXO FXS Gateway
      • Supports Dynamic Service Provisioning, Firmware management, and Remote Diagnostics
      • Centralized Control and Monitoring of Multiple Gateways
      • Automatic Updates and Configuration Changes Over the Network

      Highlight Features

      image

      Built-in PBX Functionality

      Streamline your communication infrastructure by integrating PBX capabilities into the VoIP FXO FXS Gateway device for simplified call routing, advanced call handling, and enhanced communication management

      01

      Hotline Extension Dialing

      VoIP FXO FXS Gateway enables designated extension to automatically establish a call without dialing, streamlining communication and improving responsiveness

      02

      Digest Authentication

      Ensure secure and authenticated communication through VoIP FXO FXS Gateway by verifying and protecting user credentials for enhanced privacy

      03

      image

      Automatic Number Translation

      Convert and route incoming and outgoing calls to their respective translated numbers through VoIP FXO FXS Gateway for streamlined communication management

      04

      image

      Call Detail Record

      Capture and store detailed information about each call with VoIP FXO FXS Gateway for monitoring, billing, and analysis purposes

      05

      image

      CLI Display

      VoIP FXO FXS Gateway enables real-time caller information on the connected devices for efficient call handling and personalized communication

      06

      image

      Emergency Number Dialing

      Direct and immediate access to emergency services for enhanced safety and peace of mind

      07

      SNMP Monitoring

      VoIP FXO FXS Gateway enables centralized monitoring and tracking of device performance, status, and network health for effective troubleshooting and optimization

      08

      image

      Group Call Pickup

      Answer incoming calls from designated call groups, promoting efficient call handling and teamwork through VoIP FXO FXS Gateway

      09

      SETU VFX

      SETU VFX Variants.

      VoIP FXO FXS Gateway to Bridge Business Networks

      VOIP-FXS Gateway with 4 VOIP and 4 FXS Ports

      • 9 SIP Accounts
      • 4 VoIP Channels
      • 1 FXO Port (PSTN Pass-Through) – Only used in emergency applications
      • 4 FXS Ports
      • 2 Ethernet Ports
      SETU VFX404

      Technical Specifications

      Download
      ParametersSpecifications
      SIP Accounts9
      Data Network2 Port 10/100 Base-T (RJ45)
      VoIP ProtocolSIPv2, SDP, RTP (RFC 2833)
      Network ProtocolIPv4, TCP, UDP, PPPoE, DHCP Server & Client, SNTP, NAT, STUN, HTTP, DynDNS, Port Forwarding and DMZ
      Voice CodecsG.711 A/µ-Law, G.723.1, G.729AB, iLBC, GSM-FR
      Line Echo CancellationG.168 with 128ms Tail Length
      Voice Processing TechniquesDynamic Jitter Buffer (Adaptive) Comfort Noise Generation (CNG) Voice Activity Detection (VAD)
      Fax over IP (FoIP)T.38 and Pass-Through
      Quality of Service (QoS)Layer 3 DiffServ and ToS
      SecuritySRTP/TLS over SIP
      FXO
      SignalingLoop Start
      ConnectorRJ11
      Loop Limit1200W
      DTMF Dialling & ReceptionITU-T Q.23 and Q.24
      CLI ReceptionDTMF, FSK ITU-T V.23 and FSK Bellcore 202, TEL URI
      Return Loss>18dB
      Call MaturityDelay and Polarity Reversal
      FXS
      SignalingLoop Start
      ConnectorRJ11
      Loop Limit1800W (Max.) Excluding Telephone Set
      DTMF Dialing & ReceptionITU-T Q.23 and Q.24
      CLI ReceptionDTMF, FSK ITU-T V.23 and FSK Bellcore 202
      Return Loss18dB
      POWER SUPPLY (Input)
      SETU VFX12V DC, 2A
      POWER CONSUMPTION (Typical)
      SETU VFX15W
      MECHANICAL (Dimension W x H x D)
      SETU VFX16.2 x 5.6 x 23.1 cm
      WEIGHT
      SETU VFX0.8 Kgs (1.76 lbs)
      OPERATING TEMPERATURE
      SETU VFX-10°C to +50°C
      STORAGE TEMPERATURE
      SETU VFX-40°C to +85°C
      View More

      VoIP-FXS Gateway with 8 VoIP and 8 FXS Ports

      • 9 SIP Accounts
      • 8 VoIP Channels
      • 1 FXO Port (PSTN Pass-Through) – Only used in emergency applications
      • 8 FXS Ports
      • 2 Ethernet Ports
      SETU VFX808

      Technical Specifications

      Download
      ParametersSpecifications
      SIP Accounts9
      Data Network2 Port 10/100 Base-T (RJ45)
      VoIP ProtocolSIPv2, SDP, RTP (RFC 2833)
      Network ProtocolIPv4, TCP, UDP, PPPoE, DHCP Server & Client, SNTP, NAT, STUN, HTTP, DynDNS, Port Forwarding and DMZ
      Voice CodecsG.711 A/µ-Law, G.723.1, G.729AB, iLBC, GSM-FR
      Line Echo CancellationG.168 with 128ms Tail Length
      Voice Processing TechniquesDynamic Jitter Buffer (Adaptive) Comfort Noise Generation (CNG) Voice Activity Detection (VAD)
      Fax over IP (FoIP)T.38 and Pass-Through
      Quality of Service (QoS)Layer 3 DiffServ and ToS
      SecuritySRTP/TLS over SIP
      FXO
      SignalingLoop Start
      ConnectorRJ11
      Loop Limit1200W
      DTMF Dialling & ReceptionITU-T Q.23 and Q.24
      CLI ReceptionDTMF, FSK ITU-T V.23 and FSK Bellcore 202, TEL URI
      Return Loss>18dB
      Call MaturityDelay and Polarity Reversal
      FXS
      SignalingLoop Start
      ConnectorRJ11
      Loop Limit1800W (Max.) Excluding Telephone Set
      DTMF Dialing & ReceptionITU-T Q.23 and Q.24
      CLI ReceptionDTMF, FSK ITU-T V.23 and FSK Bellcore 202
      Return Loss18dB
      POWER SUPPLY (Input)
      SETU VFX12V DC, 2A
      POWER CONSUMPTION (Typical)
      SETU VFX15W
      MECHANICAL (Dimension W x H x D)
      SETU VFX16.2 x 5.6 x 23.1 cm
      WEIGHT
      SETU VFX0.8 Kgs (1.76 lbs)
      OPERATING TEMPERATURE
      SETU VFX-10°C to +50°C
      STORAGE TEMPERATURE
      SETU VFX-40°C to +85°C
      View More

      VoIP-FXO Gateway with 4 VoIP and 4 FXO Ports

      • 9 SIP Accounts
      • 4 VoIP Channels
      • 4 FXO Ports
      • 2 Ethernet Ports
      SETU VFX440

      Technical Specifications

      Download
      ParametersSpecifications
      SIP Accounts9
      Data Network2 Port 10/100 Base-T (RJ45)
      VoIP ProtocolSIPv2, SDP, RTP (RFC 2833)
      Network ProtocolIPv4, TCP, UDP, PPPoE, DHCP Server & Client, SNTP, NAT, STUN, HTTP, DynDNS, Port Forwarding and DMZ
      Voice CodecsG.711 A/µ-Law, G.723.1, G.729AB, iLBC, GSM-FR
      Line Echo CancellationG.168 with 128ms Tail Length
      Voice Processing TechniquesDynamic Jitter Buffer (Adaptive) Comfort Noise Generation (CNG) Voice Activity Detection (VAD)
      Fax over IP (FoIP)T.38 and Pass-Through
      Quality of Service (QoS)Layer 3 DiffServ and ToS
      SecuritySRTP/TLS over SIP
      FXO
      SignalingLoop Start
      ConnectorRJ11
      Loop Limit1200W
      DTMF Dialling & ReceptionITU-T Q.23 and Q.24
      CLI ReceptionDTMF, FSK ITU-T V.23 and FSK Bellcore 202, TEL URI
      Return Loss>18dB
      Call MaturityDelay and Polarity Reversal
      FXS
      SignalingLoop Start
      ConnectorRJ11
      Loop Limit1800W (Max.) Excluding Telephone Set
      DTMF Dialing & ReceptionITU-T Q.23 and Q.24
      CLI ReceptionDTMF, FSK ITU-T V.23 and FSK Bellcore 202
      Return Loss18dB
      POWER SUPPLY (Input)
      SETU VFX12V DC, 2A
      POWER CONSUMPTION (Typical)
      SETU VFX15W
      MECHANICAL (Dimension W x H x D)
      SETU VFX16.2 x 5.6 x 23.1 cm
      WEIGHT
      SETU VFX0.8 Kgs (1.76 lbs)
      OPERATING TEMPERATURE
      SETU VFX-10°C to +50°C
      STORAGE TEMPERATURE
      SETU VFX-40°C to +85°C
      View More

      VoIP-FXO Gateway with 8 VoIP and 8 FXO Ports

      • 9 SIP Accounts
      • 8 VoIP Channels
      • 8 FXO Ports
      • 2 Ethernet Ports
      SETU VFX880

      Technical Specifications

      Download
      ParametersSpecifications
      SIP Accounts9
      Data Network2 Port 10/100 Base-T (RJ45)
      VoIP ProtocolSIPv2, SDP, RTP (RFC 2833)
      Network ProtocolIPv4, TCP, UDP, PPPoE, DHCP Server & Client, SNTP, NAT, STUN, HTTP, DynDNS, Port Forwarding and DMZ
      Voice CodecsG.711 A/µ-Law, G.723.1, G.729AB, iLBC, GSM-FR
      Line Echo CancellationG.168 with 128ms Tail Length
      Voice Processing TechniquesDynamic Jitter Buffer (Adaptive) Comfort Noise Generation (CNG) Voice Activity Detection (VAD)
      Fax over IP (FoIP)T.38 and Pass-Through
      Quality of Service (QoS)Layer 3 DiffServ and ToS
      SecuritySRTP/TLS over SIP
      FXO
      SignalingLoop Start
      ConnectorRJ11
      Loop Limit1200W
      DTMF Dialling & ReceptionITU-T Q.23 and Q.24
      CLI ReceptionDTMF, FSK ITU-T V.23 and FSK Bellcore 202, TEL URI
      Return Loss>18dB
      Call MaturityDelay and Polarity Reversal
      FXS
      SignalingLoop Start
      ConnectorRJ11
      Loop Limit1800W (Max.) Excluding Telephone Set
      DTMF Dialing & ReceptionITU-T Q.23 and Q.24
      CLI ReceptionDTMF, FSK ITU-T V.23 and FSK Bellcore 202
      Return Loss>18dB
      POWER SUPPLY (Input)
      SETU VFX12V DC, 2A
      POWER CONSUMPTION (Typical)
      SETU VFX15W
      MECHANICAL (Dimension W x H x D)
      SETU VFX16.2 x 5.6 x 23.1 cm
      WEIGHT
      SETU VFX0.8 Kgs (1.76 lbs)
      OPERATING TEMPERATURE
      SETU VFX-10°C to +50°C
      STORAGE TEMPERATURE
      SETU VFX-40°C to +85°C
      View More

      Resources

      Manuals

      Technical Specifications